Filter
Top Products
8
Connecting to wireless network
Step 1 – Choose Wlan Setting
Note: a. Unless you set your internet to LAN connection, it will automatically choose WLAN connection, and
then skip to step 2 below.
b. If you have set it to LAN, you may need to do a small operation as follows:
1. Refer to page 6 “choose LAN setting”, rotate the Scroll knob to <Wireless>, and press to confirm.
or
2. With the cursor pointing to <DHCP enable>, press to confirm.
Step 2 – Select Your Region
1. Rotate the Scroll knob to <Internet radio>, and press to confirm.
Note: If you make a mistake at any point, press the BACK button to go back to the previous screen.
Then the display will show a list of regions for you to choose.
2. Rotate the Scroll knob to your region, and press to confirm. The Radio will save it in memory.
After a few minutes, it will ask you to enter a network.