Filter
Top Products
Ovatio
n
User manual
Page 8 clearaudio electronic GmbH 2012
Please note:
The marks (dots) on the sub-platter and the top of the bearing have been carefully measured.
Please make sure they align exactly as shown in picture below:
2.5
Now carefully place the platter onto the bearing. To avoid damage make sure the inverted bearing
slides slowly on the bearing shaft. Hold the platter in one hand while with the other is securing the
bearing top so it can neither slip and nor fall on the turntable.
Please also make sure they align exactly as shown in picture below.
Pic. 6: Alignment of sub-platter and bearing markings
Pic. 7: Seating the platter on to the bearing
Pic. 7 a: Alignment of sub-platter and bearing
markings