Filter
Top Products
Ovatio
n
User manual
Page 10 clearaudio electronic GmbH 2012
1. Carefully install first the cables trough the smaller fitting in the mounting base until the position
and cable cover (attached on the cable) fits in the cutout of the mounting base.
2. Then install the tonearm shaft trough the bigger fitting in the mounting base.
3. Now adjust the height of the tonearm.
4. Finally tighten the tonearm in the mounting base by screwing the integrated screw in the front of
the mounting base.
5. For further settings of the tonearm and cartridge mounting please refer to the user manual of the
respective manufacturer.
If you purchased your clearaudio
Ovation
turntable as a package with tonearm and cartridge, you
will find a Smart Level Gauge in your accessory, which will help you to adjust the Tracking Force of
the cartridge:
3
Diese Position der Nadel entspricht
einer Auflagekraft von 20 mN (2,0g)
This position of the diamond
correlates to a tracking force of
20 mN (2,0g)
Tracking force to low! /
Auflagekraft zu niedrig!
Tracking force to high! /
Auflagekraft zu hoch!
Pic. 10: Use of the Smart Level Gauge