Filter
Top Products
17
Audio setup
Dolby/DTS setup
Audio setup
> Dolby/DTS setup
Preset setup
Treble ---ll--- 0dB
Bass ---ll--- 0dB
LFE level 0dB
Exit
5.1 AUDIO SETUP:
These displays show that you have accessed the Audio setup sub-menu and chosen the
Dolby/DTS setup. You can scan through the available choices by pressing the \/ and /\
buttons on the remote. When the feature you wish to adjust is highlighted press the < or
> key to decrease or increase the level. To leave the menu and save the settings scroll
down to Exit and press the ENTER key.
TV Display Panel Display
5.1.1 Audio setup: The Audio setup includes Dolby/DTS setup, Preset setup, Bass and Treble controls, and LFE (Low
Frequency Effects) level adjustment.
• Treble and Bass settings can be adjusted plus or minus 12dB in 1dB steps.
• The LFE (Low Frequency Effects) channel contains only low frequency signals. It is the “0.1” of the 5.1 or 7.1
channel digital surround signal. The LFE channel is present only with Dolby Digital, Dolby Digital EX, DTS and
DTS-ES sources. The LFE level can be set from –10dB to 0dB.
5.1.2 Dolby/DTS setup
:
This sub menu permits the following adjustments for the Dolby Pro Logic II Music mode and
DTS Music mode.
Dolby Pro Logic II Music mode setup:
• “PLII Panorama” setting (ON/OFF) affects the surround sound field. With PLII panorama “On”, the sounds from
the front channels are spread to the surround channels.
• “PLII Center Width” (Min to Max) allows the adjustment of the Center image from all front speakers to varying
degrees.
• “PLII Dimension” (-3 to 3) controls the front-to-surround balance of the sound field.
DTS Music mode setup:
• NEO:6 Center Image (0 to 6) controls the balance between the center and the left and right front channels.
5.1.3 Preset setup:
The Presets are used to temporarily change the bass and treble controls and the levels of the
center, surround and subwoofer speakers. The Preset setup allows one to program five different presets, which
can be assigned to any source in the “Source setup menu”. This will be useful in the event that you require a
different tonal balance depending on the source you are using in your system. For example, you might decide to
have a different bass and treble setting for playback from your VCR.
For as long as the specific source is selected:
• The preset Treble and Bass settings replace the settings in the Audio setup
• The preset Center, Surround, and Subwoofer levels are added to values in the Level setup.