Filter
Top Products
THANK YOU FROM EVERYONE
AT CLASSÉ
Thank you for purchasing the Classé Audio CT-10
AM/FM RDS TUNER.
We take great pride in offering components that
combine exceptional sonic performance and long
term reliability. To do that, we have invested in
extraordinary design and manufacturing facilities.
We trust that you will enjoy your purchase for
many years to come.
CLASSÉ DESIGN PHILOSOPHY
All our components benefit from the same rigorous
design goal: All Classé products must reproduce
music with the harmonics and spatial integrity
typical of fine instruments heard in a live
performance.
Single Circuit Design
To this end, we make extensive use of carefully
optimised versions of the same basic circuit
precisely matched to specific power requirements.
This means that all Classé line level components
and power amplifiers benefit from years of
refinement. However, our efforts do not stop here.
Listening: The Critical Design Element
Once we determine general circuit values for a
particular application, we listen carefully while
exchanging and mixing different parts (transistors,
capacitors, wiring, PC boards, etc.) and adjusting
specific operating voltages within proper
engineering ranges.
Extended Real-World Lifespan
Every Classé component, even the most affordable,
benefits from our painstaking attention to design
parameters. The result is an optimum balance
between the often conflicting demands of
exceptional performance and long term reliability.
Our most expensive components gain from even
tighter tolerance parts and highly segmented and
exceptionally robust power supplies with large
reserve current capabilities.
Our Pride in Manufacturing, Your Pride in
Ownership
We build all of our components to the highest
possible standards. From multi layer glass epoxy
circuit Boards with the highest quality components
and full sized power supplies, every Classé product
is a tribute to both the science and art of sound
reproduction. We hope that you derive as much
pleasure and satisfaction in using your Classé as we
did in producing it.
TABLE OF CONTENTS
ENGLISH..........................................................................1
FRANÇAIS
......................................................................7
DEUTSCH
....................................................................13
NEDERLANDS
..........................................................19
ΕΛΛΗΝΙΚΑ
................................................................25
............................................................................32
SPECIFICATIONS
........................................................37
SAFETY INSTRUCTIONS
1. WATER AND MOISTURE: This product should
not be used near water. To prevent fire or shock
hazard, do not expose this product to rain or
moisture.
2. HEAT: This product should be situated away
from heat sources such as radiators, heat
registers, stoves, or other appliances which
produce heat.
3. POWER SOURCES: This product should be
connected to an AC power source of the proper
rated voltage. The original shipping container
and the serial number tag at the back of the unit
will stipulate the AC voltage from which this unit
can operate correctly.
4. SERVICING: Do not open this unit for any
reason. No user serviceable parts inside. Refer
servicing to an authorized service technician.
5. NON-USE PERIODS: The power cord of this
unit should be unplugged from the AC outlet
when left unused for an extended period of
time.
6. DO NOT REMOVE THE TOP COVER while the
unit is ‘on’ or connected to an AC outlet, there
is a SHOCK HAZARD.
1