Filter
Top Products
29
brightness The brightness setting of the CP-500 has three possible values: low, medium,
and high. Select the appropriate setting based on the level of ambient light
typically found in your listening room while using the system. A
high brightness
setting usually works best in brightly-lit rooms; you may find that a lower setting
is less visually intrusive under more subdued lighting conditions.
timeout If you prefer listening to music in a dimly-lit or darkened room, you may find
even the low brightness setting of the display somewhat distracting. If so, you
can vary the
timeout of the backlighting so as to turn it off entirely after a
period of inactivity you select.
In this context, activity refers to any use of the user interface. This includes hard
buttons, the LCD touchscreen, and the remote control.
For example, if you reduce the timeout to its minimum setting, the backlighting
will illuminate the display as soon as you interact with any of the CP-500
controls, and stay on for only three seconds – just long enough for you to check
on something. If you continue to use any of the controls (at least once every
three seconds), the display will remain lit. It will then extinguish itself after three
seconds of inactivity on your part.
If you prefer the display of the CP-500 to remain on whenever not in
standby
, choose the never timeout setting. The lamp in the LCD display was
designed for harsh automotive environments and will give you many years of
reliable operation. If you plan to leave the unit on continuously, however, we
recommend that you keep the timeout delay set to less than one minute. (Note
that setting the brightness to a lower setting does not increase the life of the
lamp.)
language The language menu offers you any of the different languages supported by
the CP-500 GUI. Classé has provided our international distributors with a
software tool that makes it possible for them to customize the translations to
suit their local customs and terminology, in an effort to ensure that the CP-500’s
operation is as intuitive to use in every country as it is in our home country of
Canada.
main balance
The main balance control gives you both a numeric and a graphical indication
of the current balance setting for the CP-500.
Some recordings are not balanced particularly well between the left and right
channels. If the image presented by a particular recording seems heavily weighted
to the left (for example), you can restore a more natural perspective with the
balance control. To shift the image to the right, touch the right>> button one or
more times as needed to correct the perceived imbalance.