Filter
Top Products
20
3 Navigation Keys
The central section of the remote control contains the navigation keys.
This array of buttons is similar to what you may have seen on remote
controls for DVD players, and is used for navigation of the menu system
of the CP-500.
• Home returns you to the normal input selection controls
normally shown on the LCD screen on the front panel of the
CP-500. This provides a quick way to get back to normal
operation, regardless of how deep you might be in the menu
system.
• Menu serves two functions: it calls up the menu system when
you need it in order to adjust something to your preference;
once within the menu system, pressing Menu returns you to the
previous level of the menu system. If you press Menu
when at
the top level of the menu system, it will take you back out of the
menu system to the normal display.
• The Bal (balance) key takes you directly to the
balance screen
in the menu system; once there, you can use the navigation keys
on the remote to select either the
left or right buttons on the
LCD touchscreen, depending on which way you wish to move
the balance. Adjust the relative left-right balance of the system
by using the Enter key on the remote to “press” the appropriate
button on the display.
• Up/Down/Left/Right keys allow you to move within a
particular menu screen, changing the highlighted item up/down/
left/right as you like, from the comfort of your listening position.
• The Enter key allows you to select the highlighted item, having
the same effect as if you had pressed the button on the LCD
touchscreen.
4 Fkey Controls
The CP-500 remote control can also control user-defined functions as
well. The
F1/F2/F3/F4 keys are available for controlling aspects of the CP-
500 not covered by the other buttons on the remote control.
You are able to choose what the CP-500 should do in response to receiving
the infrared signal that a particular Fkey has been pressed. The list of
possible functions is quite extensive, and is found in the menu system (see
the next section in this manual, entitled The Menu System).
Note: The Fkeys on all Classé remote controls issue the same infrared
commands. This saves you from having to be sure you have
picked up the proper remote, since all your Classé remotes
will perform the same function for each Fkey.