Filter
Top Products
21
English
DXZ366MP
7. Turn the
[
ROTARY
]
knob to select the desired
character.
8. Repeat steps 5 to 7 to enter up to 10 characters
for the title.
9. Press and hold the
[
]
button for 2 seconds
or longer to store the title into memory and
cancel title input mode.
1. Press the
[
SRC
]
button to select the mode you
want to enter a title
(
TUNER
,
CD, CD changer
or TV
)
.
2. Select and play a CD in the CD changer or tune
in to a TV station or TUNER for which you want
to enter the title.
3. Press the
[
D
]
button and display the title
display.
4. Press and hold the
[
T
]
button for 1 second or
longer.
The display switches to the title input display.
5. Press the
[ , ]
lever upward or downward
to move the cursor.
6. Press the
[
BND
]
button to select a character.
Each time you press the
[
BND
]
button, the
character changes in the following order:
Capital letters Numbers Symbols
Capital letters...
• Performing a system check
This function allows you to perform a system check
from the adjust mode when required.
2-1. Select “SYS CHK <E>”.
3-1. Press and hold the
[
]
button for 1 second
or longer.
“SYSTEM CHK” appears in the display, then
the unit returns to the previous operation
mode.
Operations Common to Each Mode
Clearing titles
1. Select and play a CD in the CD changer or tune
in to a TV station or TUNER for which you want
to clear the title.
2. Press the
[
D
]
button and display the title
display.
3. Press and hold the
[
T
]
button for 1 second or
longer.
The display switches to the title input display.
4. Press and hold the
[
BND
]
button for 1 second
or longer.
All characters in the title disappear.
5. Press and hold the
[
]
button for 2 seconds
or longer to clear the title and cancel title input
mode.
• ON:
Use with connected AMP.
• OFF:
Use with inside AMP.
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for CD, CD changer and TV
stations. The number of titles that can be entered
for each mode are as follows.
Mode Number of titles
CD mode 50 titles
TV mode 20 titles
Tuner mode 30 titles
CD changer mode Number of titles
DCZ625 connected 100 titles
CDC655Tz connected 100 titles
• Displaying the Satelite ID No.
∗ The factory default setting is the upper 6 digits.
2-1. Select “SID DISP”.
3-1. Turn the
[
ROTARY
]
knob to switch between
the display for the upper 6 digits and the
lower 6 digits.