Filter
Top Products
20
English
DXZ366MP
2-1. Select “SCREEN SVR”.
3-1. Turn the
[
ROTARY
]
knob to select the setting.
Each time you turn the
[
ROTARY
]
knob,
the setting changes in the following order:
SS OFF SS ON SS MESSAGE.
Operations Common to Each Mode
• Entering MESSAGE INFORMATION
Message up to 30 characters long can be stored
in memory and displayed as a type of screen
saver setting.
∗ The factory default setting is “WELCOME TO
CLARION
”.
2-1. Select “MSG INP <E>”.
3-1. Press the
[
]
button.
3-2. Press and hold
[
BND
]
button for 1 second or
longer to clear the old message.
3-3. Press the
[
,
]
lever upward or downward
to move the cursor.
3-4. Press the
[
BND
]
button to select a character.
Each time you press the
[
BND
]
button, the
character changes in the following orders:
Capital letters Numbers Symbols
Capital letters...
3-5. Turn the
[
ROTARY
]
knob to select the desired
character.
3-6. Repeat step 3-3 to 3-5 to enter up to 30
characters for message.
3-7. Press and hold the
[
]
button for 2 seconds
or longer to store the message in memory
and cancel input message mode.
• Dimmer control
You can setting the dimmer control “ON” or
“OFF”.
∗ The factory default setting is “ON”.
2-1. Select “DIMMER”.
3-1. Turn the
[
ROTARY
]
knob to select “ON” or
“
OFF”.
• Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA title.
∗ The factory default setting is “ON”.
2-1. Select “AUTO SCROL”.
3-1. Turn the
[
ROTARY
]
knob to select “ON” or
“OFF”.
To change other settings
1. Press the
[
ADJ
]
button to switch to the adjust
-
ment selection display.
2. Press the
[ , ]
lever upward or downward
to select the “item name”.
Each time the
[ , ]
lever is pressed up/
down, the item display changes in the following
order:
“
BLINK LED” “AMP CANCEL”
“SYS CHK
(
E
)
”
3. Turn the
[
ROTARY
]
knob to select the “desired
setting item”.
∗ After completing settings, press the
[
ADJ
]
but-
ton to return to the previous mode.
• Anti-theft indicator
The red Anti-theft indicator is a function for pre-
venting theft. When the DCP is removed from the
unit, this indicator blinks.
∗ The factory default setting is “OFF”.
2-1. Select “BLINK LED”.
3-1. Turn the
[
ROTARY
]
knob to select “ON” or
“OFF”.
• Setting the external amplifier
∗ The factory default setting is “OFF”.
2-1. Select “AMP CANCEL”.
3-1. Turn the
[
ROTARY
]
knob to select “ON” or
“OFF”.
• ON:
To scroll automatically.
• OFF:
To scroll just 1 time when the title was changed or the
[
T
]
button was pressed for 1 second or longer.
∗ Press and hold the
[
BND
]
button for 1 second
or longer to cancel the input message.
Then press and hold the
[
]
button for 2
seconds or longer to store the message and
the message return to default setting.
• Displaying the Satelite ID No.
∗ The factory default setting is the upper 6 digits.
2-1. Select “SID DISP”.
3-1. Turn the
[
ROTARY
]
knob to switch between
the display for the upper 6 digits and the
lower 6 digits.