Filter
Top Products
16
English
DXZ366MP
Note:
• If the FLIP DOWN PANEL will not open far enough,
open it gently with your hand.
2. Press the
[ ]
button. Remove the disc after it
is ejected.
3. Close the FLIP DOWN PANEL.
Notes:
• Always close the FLIP DOWN PANEL once you
take out the disc.
• If you force a CD into before auto reloading, this
can damage the CD.
• If a CD
(
12 cm
)
is left in the ejected position for 15
seconds, the CD is automatically reloaded.
(
Auto
reload
)
.
• 8 cm CDs are not auto reloaded. Be sure to remove
it when ejected.
CD/MP3/WMA Mode Operations
Listening to a disc already loaded
in the unit
Press the
[
SRC
]
button to select the CD/MP3/
WMA mode.
When the unit enters the CD/MP3/WMA mode,
play starts automatically.
If there is no disc loaded, the indication “NO DISC
”
appears in the title display.
∗ The mode changes each time the
[
SRC
]
button is
pressed.
(
Modes are not displayed for equipment
that is not connected.
)
Radio CD/MP3/WMA
(
CD changer
)
(
DVD changer
)
(
TV
)
Radio...
Loading a CD
1. Press the
[
OPEN
]
button to access the CD
SLOT behind the FLIP DOWN PANEL.
2. Insert a CD into the center of the CD SLOT
with the labeled side facing up. The CD plays
automatically after loading.
Notes:
• Never insert foreign objects into the CD SLOT.
• If the CD is not inserted easily, there may be an
-
other CD in the mechanism or the unit may require
service.
• Discs not bearing the or mark and
CD-ROMs cannot be played by this unit.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
Loading 8 cm CD
∗ No adapter is required to play an 8 cm CD.
∗ Insert the 8 cm CD into the center of the insertion
slot.
3. Close the FLIP DOWN PANEL.
Be careful not to catch your hand or fingers
while closing the FLIP DOWN PANEL.
Notes:
• If the FLIP DOWN PANEL does not open fully,
gently open with your hand.
• After loading a CD, always close the FLIP DOWN
PANEL.
CAUTION
!
Pausing play
1. Press the
[
]
button to pause play. “PAUSE
”
appears in the display.
2. To resume CD play, press the
[
]
button
again.
Displaying CD titles
This unit can display title data for CD-text/MP3/
WMA disc and user titles input with this unit.
1. Press the
[
D
]
button to display the title.
2. Each time you press the
[
T
]
button, the title
display changes in the following order:
• CD-TEXT data
User title
(
disc
)
CD-text title
(
disc
)
Artist name
CD-text title
(
track
)
User title
(
disc
)
...
• MP3/WMA disc
Folder Track Album TAG Artist TAG
Title TAG Folder...
Notes:
• If the CD playing is not a CD-text data or no user
title has been input, “NO TITLE” appears in the
display.
• If MP3/WMA disc is not input TAG, “NO TAG” ap
-
pears in the display.
• For MP3, supports ID3 Tags V2.3/2.2/1.1/1.0.
• Tag displays give priority to V2.3/2.2
• In the case of album Tags for WMA, the information
written into the extension header is displayed.
• Only ASCII characters can be displayed in Tags.