Filter
Top Products
English
6 CZ109
Removing the DCP
1. Press and hold the [SRC] button (1 sec.) to
switch off power.
2. Press the [RELEASE] button.
∗ DCP is unlocked.
3. Remove DCP.
Attaching the DCP
1. Insert the right end of DCP into main unit.
2. Press left end of DCP into main unit.
CAUTION
• After removal, be careful not to drop the
DCP or subject it to strong impacts, to
prevent damage.
• Once the [RELEASE] button is pressed
and the DCP is unlocked, car vibrations
can cause the DCP to fall.
• The connector for the main unit and DCP
is extremely important. Be careful not to
damage it by pressing with fingernails or
sharp objects.
Note:
• If the DCP is dirty, wipe off with a soft, dry cloth
only.
4. DCP
(DETACHABLE CONTROL PANEL)
[RELEASE] button
DCP
1.
DCP
2.
Main Unit Front
Main unit connector
DCP Rear Panel
DCP
connector