Filter
Top Products
24 ADZ625
TV tuner functions
When an optional TV tuner is connected through
the CeNET cable, this unit controls all TV tuner
functions. To watch TV requires a TV tuner and
monitor.
Watching a TV
1. Press the [FNC] button and select the TV
mode.
2. Press the [BND] button to select the desired
TV band (TV1 or TV2). Each time the button
is pressed, the input selection toggles be-
tween TV1 and TV2.
3. Press the [ ] button or the [ ] button to
tune in the desired TV station.
Watching a video
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12 V video cassette player (VCP) or video cas-
sette recorder (VCR) to the TV tuner input termi-
nal.
1. Press the [RDM] button to select VTR.
2. To return to the TV broadcast, press the [RDM]
button.
Tuning
There are 3 types of tuning mode available, Seek
tuning, manual tuning and preset tuning.
Seek tuning
1. Press the [BND] button and select the desired
TV band (TV1 or TV2).
∗ If “MANU” is lit in the display, press and hold
the [BND] button for 1 second or longer.
“MANU” in the display goes off and seek tun-
ing is now available.
2. Press the [ ] button or the [ ] button to
automatically seek a station. Press the [ ]
button to automatically tune up the frequency
band to the next available TV station; press
the [ ] button to automatically tune down.
TV Operations
Manual tuning
There are 2 ways available: Quick tuning and step
tuning.
When you are in the step tuning mode, the fre-
quency changes one step at a time. In quick tun-
ing mode, you can quickly tune the desired fre-
quency.
1. Press the [BND] button and select the desired
band (TV1 or TV2).
∗ If “MANU” is not lit in the display, press and
hold the [BND] button for 1 second or longer.
“MANU” lights in the display and manual tun-
ing is now available.
2. Tune into a station.
● Quick tuning:
Press and hold the [ ] button or the [ ] but-
ton for 1 second or longer to tune in a station.
● Step tuning:
Press the [ ] button or the [ ] button to
manually tune in a station.
Recalling a preset station
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your favor-
ite TV stations and store them in memory for later
recall.
1. Press [BND] button and select the desired TV
band (TV1 or TV2).
2. To recall a stored TV station, turn the [PRE-
SET] knob either clockwise or counterclock-
wise to select that station.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press the [M] button.
“CH” is lit in the display.
3. Turn the [PRESET] knob either clockwise or
counterclockwise to select the desired preseet
memory.
4. Press and hold the [M] buttos for 2 seconds
or longer to store that station into preset
memory.