Filter
Top Products
14 ADZ625
Radio Operations
FM reception
For enhanced FM performance the
®
tuner includes signal actuated
stereo control and Multipath noise reduction cir-
cuits.
Changing the reception area
This unit is initially set to USA frequency intervals
of 10kHz for AM and 200kHz for FM. When using it
outside the USA, the frequency reception range
can be switched to the intervals below.
● Setting the reception area
1. Press the [FNC] button and select the radio
mode (FM or AM).
2. While pressing the [DISP] button, each time
you press and hold the [SPE/ANA] button for
2 seconds or longer, the reception area
switches from inside the USA to outside the
USA or from outside the USA to inside the USA.
∗ Any station preset memories are lost when the
reception area is changed.
Listening to the radio
1. Press the [FNC] button and select the radio
mode.
2. Press the [BND] button and select the radio
band. Each time the button is pressed, the
radio reception band changes in the follow-
ing order:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
3. Press the [ ] button or the [ ] button to
tune in the desired station.
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Seek tuning
1. Press the [BND] button and select the desired
band (FM or AM).
∗ If “MANU” is lit in the display, press and hold
the [BND] button for 1 second or longer.
“MANU” in the display goes off and seek tun-
ing is now available.
2. Press the [ ] button or the [ ] button to
automatically seek to the next station.
When the [ ] button is pressed, the sta-
tion is sought in the direction of higher fre-
quencies; if the [ ] button is pressed, the
station is sought in the direction of lower fre-
quencies.
Manual tuning
There are 2 ways available: Quick tuning and step
tuning.
When you are in the step tuning mode, the fre-
quency changes one step at a time. In quick tun-
ing mode, you can quickly tune the desired fre-
quency.
1. Press the [BND] button and select the desired
band (FM or AM).
∗ If “MANU” is not lit in the display, press and
hold the [BND] button for 1 second or longer.
“MANU” lights in the display and manual tun-
ing is now available.
2. Tune into a station.
● Quick tuning:
Press and hold the [ ] button or the [ ] but-
ton for 1 second or longer to manually tune to
the desired frequency.
● Step tuning:
Press the [ ] button or the [ ] button to
manually tune one step at a time to the desired
frequency.
Storing a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio sta-
tions in memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press the [M] button.
“CH” is lit in the display.
3. Turn the [PRESET] knob either clockwise or
counterclockwise to select the desired preseet
memory.
4. Press and hold the [M] button for 2 seconds
or longer to store that station into preset
memory.
Auto store
Auto store selects up to 6 stations and auto-
matically stores them into preset memory. If auto
store cannot tune in all six stations, then it stores
the strongest stations into memory and the other
presets untouched.
1. Press the [BND] button and select the desired
band (FM or AM).
2. Press and hold the [SCN] button for 2 sec-
onds or longer. The stations with good recep-
tion are stored automatically to the preset
memory.