Filter
Top Products
ADZ625 25
Auto store
Auto store selects 6 TV stations automatically
and stores each one into a preset memory.
If there are not 6 stations with good reception,
stations previously stored in memory remain and
only the strong stations are stored into memory.
1. Press the [BND] button and select the desired
TV band (TV1 or TV2).
2. Press and hold the [SCN] button for 2 sec-
onds or longer. The stations with good recep-
tion are stored automatically to the preset
memory.
Preset scan
Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function is useful for searching
for desired TV station in memory.
1. Press the [SCN] button.
2. When the desired station is found, press the
[SCN] button again to remain tuned to that
station.
Note:
• Do not press and hold the [SCN] button for 2 sec-
onds or longer. Doing so will trigger the auto store
function and start storing stations into memory.
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [ ] button or the [ ] button to
select “TV DIVER”.
3. Turn the [VOLUME] knob clockwise to set to
“ON” or counterclockwise to set to “OFF”.
● ON:
Sets reception emphasizing the visual.
● OFF:
Sets the diver setting to OFF.
4. Press
the [T]
button to return to the previous
mode.
TV Operations