Filter
Top Products
ADZ625 17
● Listening to another source while using FF
or REW (“monitor mode”)
To listen to the CD, CD/MD changer or AM/FM
tuner while the mechanism searches, press the
[FNC] button to select the desired mode. The
mechanism will stop automatically when the end
of the tape is reached.
Note:
• Use the [FNC] button and select the tape function
to resume tape playback.
APC
(Auto Program Control)
function
The APC function allows the tape to skip forward
to the beginning of the next track or rewind to the
start of the current track.
● Skipping forward to the next track (“APC-
FF”)
During tape playback, press the [ ] button
twice to fast-forward to the next track. The next
track stars playing.
● Skipping backward to the current track
(“APC-REW”)
During tape playback, press the [ ] button
twice to rewind to the start of the current track.
The current track plays from the beginning.
●
Canceling FF/REW APC to resume playback
Press the [ ] button.
● Listening to another source while using
APC (“monitor mode”)
To listen to the CD, CD/MD changer or AM/FM
tuner while the mechanism searches, press the
[FNC] button to select the desired mode. The
mechanism will stop automatically when it finds
the next track (in FF APC) or the start of the cur-
rent track (in REW APC).
Note:
• Use the [FNC] button and select the tape function
to resume tape playback.
Dolby noise reduction system
The Dolby noise reduction system increases the
volume level of high frequency sounds during
recording and sets it back to their original level
during play. This system reduces hissing noise
which is typical of cassette tapes.
∗ Dolby noise reduction manufactured under license
from Dolby Laboratories Licensing Corporation.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories Licensing Corporation.
Press the [RDM] button to select Dolby noise re-
duction. “B NR” lights in the display. Each time
you press the [RDM] button, the Dolby toggles
between B NR and OFF.
Tape Operations
Loading a tape
Load a tape into the cassette tape insertion slot.
“LOADING” appears in the display and starts
playing.
∗ When a metal or chrome bias (70µ sec) tape is
inserted, the metal bias setting is selected auto-
matically.
∗ The cassette tape slot door shuts automatically
after inserting or ejecting a tape (“Auto shut door
function”). It protects the tape mechanism from
any dust.
Listening to a tape already inserted
Press the [FNC] button to select the tape mode.
Play starts automatically. If no tape is loaded in
the unit, “NO CASS” appears in the display.
Pausing play
1. Press the [ ] button to pause play.
“PAUSE” appears in the display.
2. To resume tape play, press the [ ] button
again.
Ejecting a tape
Press the [TAPE EJECT] button to eject a tape.
Take it out from the ejected position.
∗ The radio mode is selected automatically 4 sec-
onds after the [TAPE EJECT] button is pressed.
Switching to the other side of the tape
Press the [BND] button to change tape direction
and playback.
∗ The tape mechanism automatically reverses direc-
tion and engage playback at the end of the tape
(auto reverse).
Fast-forward/fast-backward
● Fast-forward
Press the [ ] button.
● Fast-backward
Press the [ ] button.
● Canceling FF/REW
Press the [ ] button.