Filter
Top Products
Midi Operation
The controller will only respond to MIDI commands on the MIDI channel when it is set to full stop. All
MIDI control is performed using Note on commands. All other MIDI instructions are ignored. To stop a
chase, send the blackout on note.
Action
1) Press and hold the MIDI/ADD button until
the third and fourth digits on the LED
display blink.
2) Select the MIDI control channel (1~16) via
the BANK UP/DOWN buttons to set.
3) Press and hold the MIDI/ADD button to
store midi setup settings.
Notes
This is the Channel that the controller will receive
MIDI note commands.
MIDI NOTE FUNCTION (TURNON/OFF)
00 to 07
Scenes 1~8 in BANK 1
08 to 15
Scenes 1~8 in BANK 2
16 to 23
Scenes 1~8 in BANK 3
24 to 31
Scenes 1~8 in BANK 4
32 to 39
Scenes 1~8 in BANK 5
40 to 47
Scenes 1~8 in BANK 6
48 to 55
Scenes 1~8 in BANK 7
56 to 63
Scenes 1~8 in BANK 8
64 to 71
Scenes 1~8 in BANK 9
72 to 79
Scenes 1~8 in BANK 10
80 to 87
Scenes 1~8 in BANK 11
88 to 95
Scenes 1~8 in BANK 12
96 to 103
Scenes 1~8 in BANK 13
104 to 111
Scenes 1~8 in BANK 14
112 to 119
Scenes 1~8 in BANK 15
120
Chase 1
121
Chase 2
122
Chase 3
123
Chase 4
124
Chase 5
125
Chase 6
126
BLACKOUT
DMX-40B User Manual 17 Revised: 2006-12-06 09:36:47