Filter
Top Products
DELETE ALL CHASE PROGRAMS
CAUTION! This procedure will result in irrevocable loss of chase step memory. The individual
scenes and program banks will be preserved.
Action
1) Press and hold the BANK DOWN button
and the AUTO DEL button while turning
OFF the controller.
Notes
Playback (Scenes)
MANUAL RUN SCENE
When power is first turned ON, the controller will be in manual scene mode.
Action
1) Make sure neither MUSIC TRIGGER nor
AUTO TRIGGER LED's on the LED display
are on.
2) Select the program BANK that stores the
scene you want to run manually by using
the BANK UP/DOWN.
3) Press the SCENE button to run.
Notes
If you are in programming mode you can also press
and hold the PROGRAM button until the Program
LED goes off.
RUNNING IN SOUND-MODE
Action
1) Press the MUSIC/BANK-COPY button until
the MUSIC TRIGGER LED turns on.
2) Change BANK programs by using BANK
UP/DOWN buttons if necessary.
3) Press the MUSIC/BANK-COPY to exit.
Notes
In the Sound mode, programs will be triggered by the
sound using its built-in microphone. All scenes in a
Bank will chase.
RUNNING IN AUTO-MODE
Action
1) Press and hold the AUTO DEL button until
the AUTO TRIGGER LED turns on.
2) Change BANK programs by using BANK
UP/DOWN buttons if necessary.
3) You can adjust the time between steps by
moving the SPEED fader and the duration
of the step by moving the FADE TIME
fader.
4) You can change Banks while in operation
by using the BANK UP/DOWN buttons.
Notes
In the Auto mode, programs will be triggered by
controllers fade and speed time as set on the faders.
All scenes in a Bank will chase.
CAUTION! The fade setting should never be slower
than the speed setting or the scene will never
complete execution.
BLACKOUT
The Blackout button brings all lighting output to 0 or off (also called the home position of the unit).
DMX-40B User Manual 15
Revised: 2006-12-06 09:36:47