Filter
Top Products
32
Operating Instructions
Instructions D’Utilisation
Manual de Instrucciones
DG201900CK
Notes
Notes
Notas
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product
described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in
personal injury and/or property damage! Retain instructions for future reference.
Operating Instructions and Parts Manual DG201900CK
Unpacking
When unpacking this product,
carefully inspect for any damage that
may have occurred during transit.
General Safety
Information
This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols.
Danger
indicates
an imminently hazardous situation which,
if not avoided, will result in death or
serious injury.
Warning
indicates a
potentially hazardous situation which, if
not avoided, could result in death or
serious injury.
Caution
indicates
a potentially hazardous situation
which, if not avoided, may result in
minor or moderate injury.
Notice
indicates
important information, that if not
followed, may cause damage to tool.
The following safety precautions must
be followed at all times along with any
other existing safety rules.
1.Read all manuals included with this
product carefully. Be thoroughly
familiar with the controls and the
proper use of the equipment.
2.Only persons well acquainted with
these rules of safe operation should
be allowed to use this tool.
IN719900AV 6/07© 2007 Campbell Hausfeld/Scott Fetzer
See Warranty on page 10 for important information about commercial use of this product.
2-Finger
Trigger
Adjustable
Clutch Collar
Keyless Chuck
Horizontal
Barrel Level
Battery
Indicator
Magnetic
Tray
High/Low
Gear Switch
Vertical
Target
Level
Forward/Reverse
Button and
Trigger Lock
Bit Storage
Battery
Pack
Release
Soft Grip
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
Product Voltage
No-Load Max. Capacity
Battery Pack Battery charger
speed of chuck
Ø 3/8"
DG201900CK 19.2 V dc
0-360/0-1030
Ø 10 mm
DG201900BP DG029600AV
min
-1
Cordless Drill/Driver
and Charger
BUILT TO LAST
For parts, product & service information
visit www.chpower.com