Filter
Top Products
20
MMooddeess OOuuttppuutt MMooddeess OOuuttppuutt
((bbuuttttoonn
ccyycclleess
rroouunndd)) cchhaannnneellss ((bbuuttttoonn
ccyycclleess
rroouunndd)) CChhaannnneellss
PCM + PLII Movie >5.1 PCM
22
"
PCM + PLII Music >5.1
PCM + PLII Game >5.1
PCM + Neo:6 Cinema >5.1
PCM + Neo:6 Music >5.1
PassThru >5.1 !
Movie >5.1 !
Music >5.1 !
Room >5.1
!
Theatre >5.1 !
Hall >5.1 !
Dolby Digital (2/0) + PLII Movie >5.1 Dolby Digital (2/0)
22
Dolby Digital (2/0) + PLII Music >5.1
Dolby Digital (2/0) + PLII Game >5.1
Dolby Digital (3/2)
55..11
Dolby Digital EX (3/3) 5.1<
DTS (2/0)
22
DTS (3/2)
55..11
DTS ES Matrix (3/3) 5.1<
DTS ES Discrete (3/3) 5.1<
DTS 96/24
55..11
IInnccoommiinngg NNaattiivvee
aauuddiioo cchhaannnneell
ffoorrmmaatt rreessoolluuttiioonn
PPCCMM 22
((55..11//77..11
iiff
PPLLIIII//P
PLLIIIIxx
eennccooddeedd))
DDoollbbyy
DDiiggiittaall
((22//00)) 22
DDoollbbyy
DDiiggiittaall
((33//22)) 55..11
DDoollbbyy
DDiiggiittaall
EEXX
((33//33)) 66..11
DDT
TSS
((22//00)) 22
DDTTSS
((33//22)) 55..11
DDTTSS
EESS
MMaattrriixx
((33//33)) 66..11
DDTTSS
EESS
DDiissccrreettee
((33//33)) 66..11
DDTTSS
9966//2244
(
(33//22)) 55..11
Decode modes - 5.1 speaker setup
Key
5.1< Indicates a 5.1 decode of 6.1 material (phantom back centre).
>6.1 Indicates 6.1 output created by a 2.0 or 5.1 decode, post-
processed to 6.1.
>7.1 Indicates 7.1 output created by a 2.0, 5.1 or 6.1 decode, post-
processed to 7.1.
>6.1< Indicates 6.1 output created from 6.1 material, decoded as 5.1
and then post-processed to 6.1.
>7.1< Indicates 7.1 output from 6.1 material decoded as 5.1 and then
post processed to 7.1.
# Mode used to force 6.1 or 7.1 EX or ES decoding where the decoder
detects a disc as only 5.1 encoded but it is known to actually be
EX/ES encoded (i.e. the EX or ES flags are missing from the disc).
Note however that the processor cannot create ES/EX output from
5.1 encoded discs, this mode is only for when the flags are missing.
To create 6.1/7.1 from a 5.1 disc use a post processed mode
instead as shown above.
% 7.1 decode of material with 6.1 encoded channels, two Mono Back
Surrounds created from single Back Centre Surround Channel.
" Stereo or Stereo + Sub, Press Stereo Modes Button to change.
! Digital Signal Processing created modes for signals with no
encoding.
Note:
Bold entries are being output in their native resolution/format.
In all cases, pressing the Stereo Modes button always cycles round:
SStteerreeoo
MMooddeess OOuuttppuutt
cchhaannnneellss
Stereo 2
Stereo + Sub 2.1
Either native Stereo or downmix of DD/DTS 5.1/6.1 etc.
Pro Logic/Neo/
DSP Surround
Modes
Dolby Digital/
DTS Surround
Modes
Pressing a mode button will first cause the 640R to scroll
the current decode mode across the front panel display.
Pressing the mode button again whilst text is scrolling on
the display or within 4 seconds of it finishing will select and
display the next available mode.