Bose 40 Home Theater System User Manual


 
English
AM189858_03_V.pdf December 20, 2001 29
Operating Your Lifestyle
®
40 Music System
Equalizing the volume levels of external sources
The SIGNAL LEVELS selection in the MENU options allows you to adjust and equalize the
volume gain levels received from externally connected sources (VIDEO 1, VIDEO 2, AUX, TAPE).
For example, you can adjust the gain level of an external source so that volume level 50 on this
source sounds as loud as level 50 from a built-in source.
1. Using the MENU button, select SIGNAL LEVELS.
2. Press VIDEO 1, VIDEO 2, TAPE or AUX and you are shown a gain adjustment display
(Figure 34). After listening to the built-in sources (FM, AM, CD) at your preferred volume
level, use the arrow keys to adjust the signal level settings (GAIN) of the connected
sources until you get the same volumes. The adjustment range is from 15 to +15.
Figure 34
Gain adjustment display
Adjusting LCD contrast
You can adjust the contrast of the display. Press and hold the SOURCE button until Lcd
appears. Use the lower arrow buttons to change the contrast level.
Figure 35
LCD contrast adjustment
display
Adjusting the Personal music center beep
You can adjust the loudness of the beep made when pressing the display buttons. Press and
hold the SOURCE button until Lcd appears. Use the upper arrow buttons to select the bEEP
display. Use the arrow buttons to select between Lo, HI, and – – (off).
Figure 36
Beep adjustment display