Bose 40 Home Theater System User Manual


 
10 December 20, 2001 AM189858_03_V.pdf
Setting Up
230 V
115 V
Connecting the Acoustimass
®
module power (mains) cord
CAUTION:
If you have a dual-voltage system, make sure the voltage selector switch on the
Acoustimass module is set correctly.
1. On a dual voltage system, the voltage selector switch is preset at the factory to be correct
for your area. Check to be sure it is set for the proper voltage (Figure 8). Use 115V for
North America; 230V for Europe and Australia. In Europe, use the adapter plug provided. If
you are in doubt, contact your local electric utility for the appropriate voltage setting.
Note:
Do
not
plug the AC power cord into a power outlet until all component connections
are complete.
2. Plug the small end of the power (mains) cord into the Acoustimass module AC power jack.
Figure 8
Dual voltage Acoustimass
module: voltage selector switch
settings
Connecting the multi-room interface power pack
The multi-room interface comes with either a 100V, 120V, 230V, or 240V power pack. See
Figures 1 and 9. Dual voltage models include both the PS71 and PS72 power packs.
CAUTION:
Be sure to use the correct Bose
®
power pack for your area. Using the wrong one
may damage your power pack or your system.
Model PS71, 120V in North America Model PS72, 230V in Europe
Model PS73, 100V in Japan Model PS74, 230V in UK or Singapore
Model PS77, 240V in Australia
Figure 9
The AC power pack
(model PS71 shown)
Note:
Do
not
plug the power pack into a power outlet until you complete all component
connections.
1. Firmly insert the small connector on the end of the power pack cable into the AC power
jack on the back of the multi-room interface.
2. Make sure that the power pack reaches an AC (mains) outlet.