Filter
Top Products
AM189858_03_V.pdf December 20, 2001 9
OFF
POWER
ON
RIGHT
OUTPUTS
TO
CUBE
SPEAKERS
LEFT
AUDIO
INPUT
Setting Up
Right
speaker
Right-angle connector
into AUDIO INPUT
Left
speaker
Audio input cable
Power jack
Multi-pin
connector
into
ROOM A
AC
power
pack
Blue connectors from
BOSE CD to BOSE CD
Connecting the Acoustimass
®
module to the multi-room interface
Connect the module to the interface with the audio input cable (Figure 7).
1. Insert the right-angle multi-pin connector on the audio input cable into the AUDIO INPUT
jack on the module. Align the connector at the angle shown in Figure 7.
2. Plug the small black multi-pin connector (flat side facing up) into the jack marked ROOM A
(PRIMARY) on the back of the interface.
Note:
Be sure that each connector is inserted completely into each jack.
For information on connecting multi-room systems, see “Connecting additional rooms” on
page 32.
Connecting the CD changer to the multi-room interface
Connect the CD changer to the interface with the CD changer cable (Figure 7).
1. Plug a blue multi-pin connector (flat side facing up) into the jack marked BOSE CD on the
back of the interface.
2.
Plug the other blue multi-pin connector (flat side facing left) into the jack marked BOSE
CD on the back of the CD changer.
Note:
Be sure that each connector is inserted completely into each jack.
Figure 7
Speakers, CD changer, and
multi-room interface connec-
tions