Bose 191 Rough In Kit Speaker User Manual


 
2

EnglishFrançaisNederlands DeutschItaliano
SAFETY INFORMATION
Important words of caution
Please read this owner’s guide completely before you start. Then carefully consider your experience using the tools
and taking the precautions referred to here. If you have doubts about doing this installation, you should contact
either the dealer you purchased the product from, an electrician, or a professional audio/video installer. You can
describe the job and request a cost estimate before committing to installation service.
WARNING:
Installation shall be in accordance with the applicable section of the National Electrical Code, ANSI/NFPA
70, and/or the National Fire Alarm Code, ANSI/NFPA 72, as applicable. The wiring method and compartment shall be
such as not to interfere with the operation of the speaker.
CAUTION:
Consult local building codes before you get started with this installation.
CAUTION:
This product is not intended for use in Air-Handling Plenum Spaces.
CAUTION:
Failure to follow the instructions in this owner’s guide voids all warranties on your speakers.
Use these instructions with wood frame or similar construction only
Each speaker requires 8
1
/
16
in. (20.5 cm) of horizontal space, and 14 in. (35.6 cm) of vertical space inside the wall or
ceiling, plus a minimum of 4
1
/
8
in. (10.5 cm) of depth from the face of wallboard that is a maximum of
3
/
4
in.
(1.9 cm) thick.
Bose recommends installing these speakers only in wood frame or similar construction where there is enough
space between studs, as is found in 2 x 4 or 2 x 6 wall/ceiling construction. The instructions in this guide are
specific to that type of installation only.
Note:
These speakers are not designed for installation in walls or ceilings of masonry.
Important Safety Instructions
1. Read these instructions - for all components before using this product.
2. Keep these instructions - for future reference.
3. Heed all warnings - on the product and in the owner’s guide.
4. Follow all instructions.
5. Do not block any ventilation openings, install in accordance with the manufacturer’s instructions.
6. Only use attachments/accessories specified by the manufacturer.
Bose
®
Virtually Invisible
®
191 Loudspeakers comply with the following specifications:
This product conforms to the EMC Directive 89/336/EEC and to the Low Voltage Directive 73/23/EEC.
The complete Declaration of Conformity can be found on <www.bose.com>.
For your records
Serial numbers are located on the center rear of each of the Virtually Invisible
®
191 speakers.
Serial numbers:______________________________ and __________________________________
Dealer name:_______________________________________________________________________
Dealer phone:_____________________________Purchase date: __________________________
We suggest you keep your sales receipt and warranty card together with this owner’s guide.