Bose 15/10 Speaker System User Manual


 
Operation
22 - English
Programming the Solo 15 universal remote
You can program the universal remote to control your TV, DVD, Blu-ray Disc
player,
cable/satellite box, game system or DVR.
Note: Your device may not be compatible with universal remotes. See your
device’s owner’s guide for more information.
Programming your remote to control your TV
1. Power on your TV.
2. Locate the device code for your brand of TV.
Refer to the TV section in the
Universal Remote Device Codes
book (provided).
3. On the remote, press and
hold
until all six source
buttons glow, then release.
Only
glows.
4. On the number keypad, enter the
code for your brand of TV.
Note: If all six buttons blink three times,
you entered an invalid code. Re-
peat steps 2 and 3.
5. Press + on the volume button.
6. Point the remote at your TV and
press
.
The TV powers off.
7. Press EXIT to save your settings.
If your TV does not power off
Use the remote’s code scanner to find your TV’s device code.
1. Press + on the volume button to try another code.
Note: If all six buttons blink three times, you have cycled through all codes for your
device. To retry the previous code, press - on the volume button.
2. Press
.
3. Repeat steps 1 and 2 until your TV powers off.
4. Press EXIT to save your settings.