Filter
Top Products
Specifications
15
* Both channels driven at nominal line voltage 120V AC, 60 Hz.
** Requires 20A,NEMA 5-20R Type Receptacle.
Technical Specifications M600 M450 M300
Power Output
70V Mono
4-ohm
8-ohm
1200W @ 4 ohms
600W per channel*
400W per channel*
900W @ 5.5 ohms
450W per channel*
300W per channel*
600W @ 8 ohms
300W per channel*
200W per channel*
Input Sensitivity
At Backplane Connector or using
Standard Input Module (incl.)
(Module has Gain of 1)
1.161V for 600W @ 4 ohms 1.010V for 450W @ 4 ohms
0.840V for 300W @ 4 ohms
S/N Ratio (20K BW)
109 dB ref.8 ohms, F.P. 106 dB ref.8 ohms, F.P. 103 dB ref.8 ohms, F.P.
Class of Operation H H AB
Product Weight 46 lb. 44 lb.
41 lb.
Connectors: Power
Input
Output
20A line cord** 15A line cord 15A line cord
2 new Bogen std.12-pin connector modules/RCA input
5-pin "touch-proof" Barrier Strip, RCA Pre- & Post-EQ Output
Power Bandwidth 20-40 kHz .5% THD
THD @ 1 kHz rated power
less than .02%
Load Impedance 4-8 ohms, 70V
Minimum Load Impedance (Stereo) 3.2 ohms
Frequency Response @ 1 watt
20-20 kHz +/- 0.25 dB
Output Regulation, 1 kHz direct
1 kHz bridged
0.5 dB @ 8 ohms
1.5 dB @ 70V
Inputs (Plug-in modules) Electronically balanced, high-impedance module standard,other modular input types available
AC Input Voltage Range
95-130V AC, 60Hz
Maximum AC Current 20A**
15A 12A
Indicators Status (On/Protect/Sleep),Clip/Limit, Signal
Temperature Range
15 to 105 degrees F
Cooling Forced Air Variable Speed Fan
Physical Dimensions (W x H x D)
17" X 3-1/2" x 16"
Protection RF, DC, Low-frequency,Thermal,Low-Impedance, Circuit-Breaker, Short Circuit
Special Features Sleep Mode, Back-Slope regulation, Stereo,Dual Mono,70V Mono Operation,Toroidal Power Transformer