Filter
Top Products
Documentation Number 232D4SS84502 Manual 19
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445
Method Two
• Place the “Windows” disk #1 in drive A. (The instruction use
drive A as default for the floppy drive. Replace A with your drive
letter if necessary)
• Select Programs from the Start Button and click on Windows
Explorer. Click on the drive containing the SS Setup Disk.
• Double click on the file “Setup.exe”.
• Follow the instructions of the setup program.
Smart Switch Setup
To open the program select the Start button then Programs.
Under B&B Electronics select the 232XSS and 232XS5 program.
The Smart Switch program will prompt the user to select the Module
that is in use the first time that the software is run. After the proper
Module (232XSS or 232XS5) (232D4SS8 models use 232XSS) is
selected then a window specific to that Module will appear and the
user may personalize communication parameters as per their
specific needs. Com port, Baud Rate, and Data Bits (Character
Mode, and User Defined Character may also be set for 232XSS and
232XS5 Modules. The Switch address is 0 for the main device.
Should the user desire to change the Module choice to another,
select model in the Settings menu. Then select one of the two
support Module types (232XSS or 232XS5). After changing the
module number the user will see the window for the selected Smart
Switch.
Default Values
When you start Smart Switch software, the default values will be
used. The default values are:
Description Default Value
Port Address COM 2
Baud Rate 9600
Data Bits 8 Data Bits
Character Mode 3