Barco PGWU-62L-K Home Theater System User Manual


 
39
PGWX-62L/PGWU-62L/PGWX-62L-K/PGWU-62L-K - - 2015/07/27
4. User Controls
4.2 Color Coordinate Adjustment
Place the lux meters at the marked position “ “.
Placement:
Press “Menu” -> “Advanced” -> “Alignment” -> “Custom 1.
color space.
Procedure:
ALIGNMENT
Rear projection
Ceiling mode
Lens control
Keystone
Gamma
Internal pattern
Custom color space
Lens to midposition
Off
Enter
Film
Enter
Enter
Execute
Off
Select “Red Weighting of Red” to show a Red pattern.2.
Assume lux of two screens are:3.
Left: 1800 lux
Right: 1500 lux
Reduce the OSD value of the left projector to have the 4.
lux close to the right one, ex. 83.
Note: If two or above projectors are used for blending, and there is color difference between the projectors,
please adjust the color coordinate.
Note: Turn on “Auto Test Pattern”, the item will show the internal R/G/B pattern automatically.
Custom color space
Enable
Auto Test Pattern
Green Weighting of Red
Blue Weighting of Red
Green Weighting of Green
Red Weighting of Green
Blue Weighting of Green
Blue Weighting of White
On
On
Reset to default
Green Weighting of White
Red Weighting of White
Green Weighting of Blue
Red Weighting of Blue
Blue Weighting of Blue
Red Weighting of Red