Filter
Top Products
AXIS P7210 Video Encoder
Hardware Overview
Hardware Overview
7
8
9
1
2
3 4
5
6
10 11
12
13
14
15
1
Power connector
2
microSD card slot
3
I/O connector
4
RS-485/RS-422
5
Control button
6
Network connector (PoE)
7
Audio input 1
8
Audio input 2
9
Audio output 1
10
Video inputs
11
LED indicators
12
Group 1 (4 video input connectors)
13
Group 2
14
Group 3
15
Group 4
Connectors and Buttons
For technical specications, see page 56.
BNC Connector
Each video input is terminated using a coax/BNC connector. Connect a 75 Ohm coaxial video cable; the recommended maximum
length is 250 m (800 ft).
Note
75 Ohm video termination can be enabled/disabled for the video input through the product's web page at Video & Audio >
Camera Settings > Video termination. This termination is enabled on factory default. In cases where the product is to be
connected in parallel with other equipment, for optimum video quality, it is recommended that termination be enabled for
only the last device in the video signal chain.
Network Connector
RJ45 Ethernet connector. Supports Power over Ethernet (PoE).
5