Filter
Top Products
AXIS P7210 Video Encoder
Events
Events
The Axis product can be congured to perform actions when different events occur, for example, start a recording when motion is
detected. The set of conditions that denes how and when the action is triggered is called an Action Rule.
Available Action Rule triggers and conditions include:
• Detectors
- Audio Detection — trigger the rule when audio is detected, see Audio Detection, on page 32.
- Live Stream Accessed — trigger the rule when any stream is accessed and during edge storage playback.
This can for example be used to send notications.
- Motion Detection — trigger the rule when motion is detected, see Motion Detection, on page 30.
- Tampering — trigger the rule when tampering is detected, see Camera Tampering, on page 30.
• Hardware
- Video Signal — trigger the rule if video signal is lost.
- Network — trigger the rule if network connection is lost or restored. This can for example be used to start
recording to the SD card.
• Input Signal
- Digital Input Port — trigger the rule when an I/O port receives a signal from a connected device, see I/O
Ports, on page 47.
- Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see Controls on
the Live View Page, on page 10. This can for example be used to validate actions during product installation
and conguration.
- Virtual Inputs — can be used by a VMS (Video Management System) to trigger actions. Virtual inputs can, for
example, be connected to buttons in the VMS user interface.
• PTZ
- Error — trigger the rule if the PTZ functionality is not working correctly. This can for example be used to
send maintenance notications.
- Moving — trigger the rule when the camera view moves due to a PTZ operation. This can for example be used
as an additional condition to prevent an action rule triggered by motion detection to record video while the
camera view moves due to a PTZ operation.
- Preset Reached — trigger the rule when the camera stops at a preset position. This can be for example be used
with the Send Images action to upload images from the preset position.
- Ready — trigger the rule when the PTZ functionality is ready to be used. This can for example be used to steer
the camera to a specic preset position when the product is started.
• Storage
- Disruption — trigger the rule if storage problems are detected, for example if the storage device is unavailable,
removed, full, locked or if other read or write problems occur. This can for example be used to send maintenance
notications.
• System
- System Ready — trigger the rule when the product has been started and all services are running. This can for
example be used to send a notication when the product restarts.
33