Filter
Top Products
ASUS P4GD1ASUS P4GD1
ASUS P4GD1ASUS P4GD1
ASUS P4GD1
2-72-7
2-72-7
2-7
To use the Hyper-Threading Technology on thisTo use the Hyper-Threading Technology on this
To use the Hyper-Threading Technology on thisTo use the Hyper-Threading Technology on this
To use the Hyper-Threading Technology on this
motherboard:motherboard:
motherboard:motherboard:
motherboard:
1. Buy an Intel
®
Pentium
®
4 CPU that supports Hyper-Threading
Technology. Install the CPU.
2. Power up the system and enter BIOS Setup (see Chapter 4). Under the
Advanced Menu, make sure that the item
Hyper-ThreadingHyper-Threading
Hyper-ThreadingHyper-Threading
Hyper-Threading
TechnologyTechnology
TechnologyTechnology
Technology is set to Enabled. The item appears only if you installed
a CPU that supports Hyper-Threading Techonology.
3. Reboot the computer.
2.3.22.3.2
2.3.22.3.2
2.3.2
Installing the CPUInstalling the CPU
Installing the CPUInstalling the CPU
Installing the CPU
Follow these steps to install a CPU.
1. Locate the 478-pin ZIF socket on the motherboard.
2. Unlock the socket by pressing
the lever sideways, then lift it up
to a 90°-100° angle.
Make sure that the socket lever is lifted up to 90°-100° angle;
otherwise, the CPU does not fit in completely.
Socket LeverSocket Lever
Socket LeverSocket Lever
Socket Lever
9090
9090
90
°
-100-100
-100-100
-100
°
angleangle
angleangle
angle
P4GD1
P4GD1 478-pin CPU Socket