Filter
Top Products
29
Procedure for Manual Test Sequence:
• Enter the Setup Menu. Go to ‘5. LEVEL CALIBRATION’ and press SELECT.
• Use the buttons to set a. NOISE SEQUENCE to ‘Manual’.
• Press the buttons to go from speaker to speaker.
• As each speaker plays, use the buttons to adjust its loudness relative to other speakers.
• Press BACK to stop the test noise.
Procedure for Auto Test Sequence:
• Enter the Setup Menu. Go to ‘5. LEVEL CALIBRATION’ and press SELECT.
• Use the buttons to set a. NOISE SEQUENCE to ‘Auto’.
• Press SELECT to start the automatic sequence.
• As each speaker plays, use the buttons to adjust its loudness relative to other speakers. After
you make an adjustment, the next speaker will play.
• Press BACK to stop the test noise.
3. SETUP MENU continued …