Filter
Top Products
Customizing LCD Keypad Labels
8
Matrix Audio Controller LCD Keypads
To delete a letter, use the << BACK button.
Press the CENTER button to save the label.
Customizing Source Command Labels
1.
Enter the Setup menu from the front of the Matrix Controller, by pressing the SELECT button.
2. From the menu displayed, select SETUP / MRC / PROGRAM.
3. Select the source # of which you wish to customize the source command name.
4. Select "Learn IR". The first IR command for the source will be displayed.
5. Select "Next" until the IR command you wish to customize is displayed.
6. Select "Label". The first letter of the IR Command Name will be highlighted. Use the UP/DOWN
buttons to change the letters in the IR command name.
To move from letter to letter, use the FORWARD button.
To delete a letter, use the BACK button.
Press the CENTER button to save the label.
Source Names are limited to 6 characters.
Source Command Names are limited to 6 characters.