Filter
Top Products
PITCH ADJUSTMENTS
©American Audio® - www.AmericanAudio.us - CDI-500™ Instruction Manual Page 25
1. PITCH SLIDER (7):
This function will increase or decrease the tracks playback speed or "PITCH."
The maximum pitch percentage manipulation in this function is +/-100%. The
PITCH SLIDER
is used to decrease or increase the playback pitch. If the slider
is moved up (towards the top of the unit) the pitch will decrease, if the slider is
moved down (towards the bottom of the unit) the pitch will increase. The
PITCH
SLIDER adjustment can be changed to range from +/-4%, +/-8%, +/-16%, or
+/-100% (See changing "PITCH SLIDER PERCENTAGE RANGE" on the next
page). The pitch adjustments will effect normal playback and loops only when the
PITCH ON/OFF BUTTON (26)
is turned on. The pitch adjustments will not affect
your samples.
Figure 37
Figure 39
Figure 38
Using the Pitch Slider (7): Be sure the pitch function has been activated as
described above. To use the
PITCH SLIDER (7) slide the slider up and down.
Down will increase the pitch and up will decrease the pitch.
Activating the Pitch Slider (3): To activate the PITCH SLIDER (7) you must
turn on the pitch adjustment function. Press the
ON/OFF BUTTON (3) located
at the top right of the unit. The ON/OFF BUTTON (3)
LED will glow when the
function is activated. If the pitch function is not activated the
PITCH SLIDER (7)
will not function.
PITCH ADJUSTMENTS:
The different pitch adjustments allow a track's or a loop's playback speed to be manipulated. This speed manipu-
lation is commonly used to beat match between two or more music sources such as a turntable or another CD
player. The playback speed may be increased or decreased by a factor of +/-100. The next section details the
different pitch manipulation schemes.