American Audio CDI-500 CD Player User Manual


 
AUDIO OUT
DIGITAL
OUT
POWER
ON OFF
RELAY
AC IN~
230V 115V
GENERAL FUNCTIONS AND CONTROLS (Cont.)
©American Audio® - www.AmericanAudio.us - CDI-500™ Instruction Manual Page 13
Figure 5
Figure 4
B. REAR PANEL (FIGURE 4)
31. VOLTAGE SELECTOR - Because power sup-
plies vary from location to location we have
incorporated a selectable voltage switch. This
switch can select a voltage input of 120v~60Hz
or 220v~50/60Hz. Always disconnect the power
plug before changing the voltage.
32. POWER CONNECTOR - This connection is
used to connect your main power. Be sure that
your local power matches the unit’s required
power. NEVER REMOVE THE GROUND PRONG
FROM THE POWER CABLE, DOING SO MAY
RESULT IN IMPROPER OPERATION.
33. POWER BUTTON - This button is used to
turn your unit’s power on and off.
34. CUE MINI JACK - Connect the supplied mini-
plug from CUE JACK on the rear of your unit to a
compatible American Audio® mixer’s CONTROL
out. This feature is only available on American
Audio’s “Q” series mixers.
35. DIGITAL OUT - Use this connection to create
near perfect copies of your disc to a Mini disc, CD-
R, or any other digital recording device.
36. AUDIO OUT R & L - Audio out signals.
Connect stereo RCA cable from AUDIO OUT to a
mixer's LINE input.
C. FRONT PANEL (FIGURE 5)
37. TRANSPORT TRAY - This tray is used to load
and unload a compact disc. The tray is opened
and closed by pressing the OPEN/CLOSE BUT
-
TON (15). Never attempt to force the transport
tray open or closed when the power is turned off.
31
37
36 35 34 33 32