American Audio CDI-500 CD Player User Manual


 
BASIC OPERATIONS (CONT.)
Figure 30
©American Audio® - www.AmericanAudio.us - CDI-500™ Instruction Manual Page 22
14. BANK BUTTONS (12):
These buttons are used to store your samples and cue points. Only a sample or
a cue point can be stored into each of these four banks. When a sample is stored
in of the banks you may use the sample starting point as a cue point. The
BANK
BUTTONS instantly recall and play any of your stored samples or cue points with-
out interrupting music playback. When in sample mode, (see "Using the Built-In
Sampler" on page 20) and during playback, pressing any of the
BANK BUTTONS
that stores a sample, will immediately begin to play that sample without interrup
-
tion of music. If the unit is in sample mode and the drive is not in playback mode,
pressing any of the
BANK BUTTONS that stores a sample, will immediately begin
to play that sample.
15. BANK PROGRAM BUTTON (23):
Once you store samples in the four (4) Bank Buttons, the CDI-500 can be programmed to play the stored
samples in a d
esired order. You can program the four (4) banks up to 12 times. The programmed samples can
be played in your desired order without interrupting music playback. The programmed samples can be played
when the player is in Pause mode and even when the disc has been removed. If the unit is in sample mode and
the drive is not in playback mode, pressing any of the
BANK BUTTONS that stores a sample, will immediately
begin to play that sample.
To program samples:
1) Once you have one or more samples stored. Press the BANK
PROGRAM BUTTON (23). The PITCH/BPM METER (41) will now
display +1.
2) Program your Banks (Samples) in your desired order.
EXAMPLE: Bank 3; Bank 1; Bank 2; Bank 3; Bank 3; Bank
4; Bank 1
. To end programming, press the BANK PROGRAM
BUTTON (23).
3) To play your programmed samples, press the SAMPLE BUTTON
(18) then press the BANK PROGRAM BUTTON (23).
Figure 31
Figure 32