Filter
Top Products
©American Audio® - www.AmericanAudio.us - CDI-500™ Instruction Manual Page 14
GENERAL FUNCTIONS AND CONTROLS (Cont.)
D. LCD DISPLAY PANEL (FIGURE 6)
38. PAUSE INDICATOR - This indicator will glow
when the drive is in pause mode.
39. MEMORY BUCKET INDICATOR - This indi-
cator serves two functions. The black bucket out
-
line details the cue memory status, a full bucket
outline indicates the cue memory is full. The five
bars in the memory bucket detail the anti-shock
memory state. Each bar indicates 2 seconds of
digital anti-shock
40. CUE INDICATOR - This indicator will glow
when the unit is in CUE mode and will flash every
time a new CUE POINT is set.
41. PITCH/BPM METER - This meter will display
either the pitch percentage applied by the
PITCH
SLIDER (7) or BPM
.
42. PITCH/BPM INDICATOR -
Indicator will light
up when the PItch is activated or BPM
.
43. TIME BAR INDICATOR - This bar gives a
visual approximation of a track's or disc's time
This bar will begin to flash when a track is ending.
The flashing bar is great reminder, that time is
running out to get that next track ready to go.
44, 45, 46. TIME METERS - These indicators will
detail the current Minutes, Seconds, and Frames.
The meter will display either the elapse, total, or
remaining time of a track or the entire disc. The
display time will depend on the selected time func
-
tion. The selected time function will be displayed
above the TIME METER
as TOTAL REMAIN (48),
REMAIN (47) OR ELAPSE.
47. REMAIN INDICATOR - When "REMAIN"
is indicated in the
LCD DISPLAY (30) the TIME
DESCRIBED (44, 45, & 46)
in the LCD will define
the current track's remaining time.
48. TOTAL/REMAIN INDICATOR - When TOTAL
is indicated in the
LCD DISPLAY (30) the TIME
DESCRIBED (44, 45, & 46)
in the LCD (30)
will define the total disc remaining time.
When
REMAIN is indicated in the LCD DISPLAY (19) the
TIME DESCRIBED (44, 45, & 46)
in the LCD will
define the current track's remaining time.
49. RELOOP INDICATOR - Appears when LOOP
is engaged or ready to be engaged.
50. LOOP - This icon will flash when you are in
loop mode. This icon will glow when a loop has
been created but is not actively playing.
51. SINGLE INDICATOR - This indicates that the
CD drive is in single play mode, the track will play
once and return to CUE mode. If the single indi
-
cator is not on the unit is in continuous mode In
continuous mode the drive will play all the remain
-
ing tracks on the disc. Once the remaining tracks
have ended the unit will return to cue mode
52. CD DIRECTION INDICATOR -
Indicates the
direction the CD is rotating. Counter-Clockwise
rotation means the CD is playing in reverse.
53. TRACK INDICATOR - This indicator describes
which track is currently cued or is playing.
54. PLAY INDICATOR - This indicator will glow
when the unit is in play mode.
Figure 6
38
41
40
52
53
54
39
50
51
45
44
43
42
46
47
48
49