Filter
Top Products
5. STOPPING PLAYBACK - Figures 10 & 11
Stopping playback will not stop the drive mecha-
nism, but merely pause or cue the track, this func
-
tion allows the unit to begin play instantly. The drive
mechanism will only stop if a disc is ejected or the
unit has gone in to sleep mode. There are two ways
to stop (pause) playback:
1) Press the PLAY/PAUSE BUTTON (18) during
playback. This will pause playback at the exact
same point the
PLAY/PAUSE BUTTON (18) was
pressed.
2) Press the
CUE BUTTON (19) during playback.
This will pause
playback and return the track to
the last set cue point.
3. STARTING PLAYBACK - Figure 10
Insert an audio CD as described on page 15
(LOADING/EJECTING DISCS). Pressing the PLAY/
PAUSE BUTTON (18) with an audio CD loaded will
immediately start playback. The PLAY (37)
indicator
will glow as soon as playback begins. The point at
which playback starts (cue point) will automatically
be stored in the memory as the cue point. The unit
will return to this cue point (the point at which play
-
back started) when the
CUE BUTTON (19) is pressed
and released.
BASIC OPERATIONS (CONT.)
Figure 10
Figure 11
©American Audio® - www.americanaudio.us - MCD-710™ Instruction Manual Page 16
4. AUTO CUE
This function will automatically set a cue point to the first audio source when a CD is loaded. The first set
cue point will always be the beginning of track 1. If a new track is selected before the PLAY BUTTON (18)
is
pressed, a new CUE POINT will be set to reflect the new starting point.
6. PAUSING - Figure 10
This function pauses playback at the exact same point the PLAY/PAUSE BUTTON (18) was pressed. Pressing
the PLAY/PAUSE BUTTON (18) will switch between play and pause modes. When the unit is in pause mode
the PAUSE INDICATOR (38) in the VFD DISPLAY (2) and the green PLAY/PAUSE BUTTON (18) L.E.D. will begin
to flash repeatedly.