Filter
Top Products
(a) FADER “Q” START CONTROL: This feature is used with American DJ mixers also featuring Fader “Q” Start.
Connect the supplied mini plugs from Disc 1 output on CD player to the “A” player control input on the
rear of mixer. Then connect the other supplied mini plug from Disc 2 output on CD player to the “B” player
control input on the rear of mixer. By moving the mixer fader from left to right you can start and pause Disc 1 and
Disc 2 respectively. In other words, when the cross-fader of the mixer is to the left, and you move it 20% to the right,
Disc 2 will begin to play. When the crossfader is to the right, and you move it 20% to the left, Disc 1 will begin to
play. You can create great effects similar to scratching with this feature. After storing cue points on each side of the
CD player, different songs or samples may quickly be recalled by moving the mixer crossfader back and forth. New
cue points can be easily selected on the CD player (4). “Q” Start control is easy to
use and mastering this feature will help you create amazing effects with your music.
(b) BOP EFFECT: The Bop Effect button serves as two features, First, it is a stutter
effect, creating a sound similar to a Sampler. Second, it will return to the last Cue
point in memory instantly. This will allow you to create great effects. The Bop
Effect is created in an easy way. (Step 1) Press the PLAY/PAUSE BUTTON (25)
so music is playing. The PLAY/PAUSE LED will light (figure 3). (Step 2) Press the
IN/R. CUE Button (In real time cue/figure 4) at the point you want your BOP to take
place. (Step 3) Now press the BOP Button. It will produce a stutter
effect as quickly as you hit the BOP button continuously return to the Cue point.
(c) FLIP-FLOP: Once CD Player A’s track or entire CD is finished, CD Player B will
instantly cue and play its own track or entire CD.
“Flip Flop” single tracks: First, set the mixer’s crossfader in the center
position. Second, set both CD player A and CD Player B to SINGLE MODE (1)
on the LCD DISPLAY (27). Next, press PLAY (25) on CD player A and CUE (15)
on CD player B. After Player A’s single track is finished Player B will automatically
cue and play. After Player B’s track is finished, the DCD-PRO500 will “Flip Flop” back
to Player A etc. etc.
“Flip Flop” entire CDs: Follow all directions for single track flip flopping, but make
sure SINGLE MODE (1) is NOT LIT on both players LCD DISPLAYS (27).
Hooking up your DCD-PRO500 to “Flip Flop”with a Fader “Q” Start mixer:
Follow connecting steps in (a) FADER “Q” START CONTROL.
Hooking up your DCD-PRO500 to “Flip Flop”without a Fader “Q” Start mixer:
On the back of the control unit there are 2 inputs that say “control”; Plug supplied
mini plug (stereo) in from Side 1 to Side 2.
(d) 60 SECOND TRANSPORT PROTECTION: CD tray will automatically close if left open for more than 60 seconds.
(e) SLEEP MODE: The CD player’s laser will shut down after 15 minutes of inactivity (when in pause or cue mode).
This will lengthen the life of your motor drive and laser. To restart player, just press cue or play buttons.
(f) MEMORY BACKUP: This will automatically keep your last setting (repeat, SGL, CTN) even if you unplug AC
current. It will also hold your cue points in memory if you accidentally open transport or shut off power. Memory
cues are erased automatically when a new CD is played, or by holding memory button down for 3 to 4 seconds.
• 8 times over sampling 1 bit D/A converter
• Beat counter
• Auto cue
• 1/75th second frame search
• Realtime cue (“Cue on the Fly”)
• 4 different speed scan
• Pitch display
• number buttons for direct track access
• 20 programmable tracks
• 40 cue points per side can be memorized
• Digital output RCA coaxial
• Fader “Q” Start , Fader Stop , (back cue)
Relay playback (using the control jack) (a)
• Large bright LCD Screen can be viewed
from wide angles.
• Fader “Q” Start Control (a)
• Seamless Loop(uninterrupted loop play
back)
• Sampler (Forward & Reverse Sampling)
• Bop Effect (b)
• Flip-Flop (Relay Playback) (c)
• 60 second Transport Protection (d)
• Sleep Mode (e)
• Adjustable Pitch Percentage +/- 8%,
+/-12% or +/-16%
• Jog Wheel Pitch Bend +/- 16%
• Memory Backup, Default to last setting
(f)
• Instant Start within 10 msec (sound is
produced immediately when the PLAY
button is pressed)
• 6 Cue (Flash Start Buttons) on each side.
MAIN FEATURES
American DJ® AUDIO • DCD-PRO500™ INSTRUCTION MANUAL • PAGE 5
fig. 3
fig. 5
IN/R. CUE
BOP
fig. 4