Filter
Top Products
16-EN
Scanning Programmes
1 Press the SCAN button to activate the Scan mode.
The first 10 seconds of each track will be played back
in succession.
To stop scanning, press the SCAN button to
deactivate the Scan mode.
NOTES
• In case a 6-disc CD changer is connected:
Press the F button so that the "FUNC" indicator lights up,
then go to step 1.
• Press the F button to return to the normal mode.
The "FUNC" indicator light goes out.
Controlling CD Changer (Optional)
If an optional Alpine 6-disc CD Changer is connected to
the 8-pin DIN connector (M-Bus) of the CDM-7892R,
you can control the CD Changer using the CDM-7892R.
NOTE
The CD controls on the CDM-7892R for the CD Changer
operation are functional only when the CD Changer is
interconnected with the CDM-7892R.
1 Press the SOURCE button to activate the CD Changer.
The display shows the disc number and track number.
NOTE
To start play or pause play, press the :/J button.
2 Make sure that the "FUNC" indicator light goes out,
then press the Preset buttons to select the desired
disc loaded in the CD Changer.
NOTES
• After selecting the desired disc, you can operate in the same
way as for the CD player.
For details, please see the CD Operation section.
• If the "FUNC" indicator is illuminated the Disc Select
buttons become nonfunctional.
CD Player Operation
Music Sensor (Skip)
1 Momentarily press the g DN button once during CD
play to return to the beginning of the current track. If
you wish to access a track further back, repeatedly
press until you reach the desired track.
Press the f UP button once to advance to the
beginning of the next track. If you wish to access a
track further ahead, press repeatedly until the desired
track is reached.
NOTE
The music sensor feature is functional in the play or pause
mode.
Fast Forward and Backward
1 Press and hold the g DN or f UP button to
quickly move backward or forward until you reach the
desired section of the track.
Repeat Play
1 Press the REPEAT button to play back repeatedly the
track being played.
The RPT indicator appears and the track will be
played repeatedly.
Press the REPEAT button again to deactivate the
repeat play.
NOTES
• If a CD Changer is connected and the RPT ALL mode is
selected, the unit repeatedly plays back all tracks on the disc
selected.
• In case a 6-disc CD changer is connected:
Press the F button so that the "FUNC" indicator lights up,
then go to step 1.
• Press the F button to return to the normal mode.
The "FUNC" indicator light goes out.
RPT RPT ALL (OFF)
→→
SOURCE Preset
SCAN
M.I.X. (Random Play)
1 Press the M.I.X. button in the play or pause mode.
The M.I.X. indicator will illuminate and the tracks on
the disc will be played back in a random sequence.
To cancel M.I.X. play, press the M.I.X. button again.
NOTES
• In case a 6-disc CD changer is connected:
Press the F button so that the "FUNC" indicator lights up,
then go to step 1.
• Press the F button to return to the normal mode.
The "FUNC" indicator light goes out.
→
f UPg DN M.I.X.REPEAT