Filter
Top Products
13-EN
Receiving Traffic Information
1 Press the T.INFO button repeatedly until the T.INFO
indicator appears in the display.
2
Press the g DN or f UP button to select your
desired traffic information station. When a traffic
information station is tuned in, the TP indicator lights up.
Traffic information is heard only when it is being
broadcast. If traffic information is not being broadcast,
the unit is set in the standby mode. When a traffic
information broadcast begins, the unit automatically
receives it and the display shows "TRF-INFO" for a
few seconds and returns to the PS display.
When the traffic information broadcast is over, the unit
will automatically set in the standby mode.
NOTES
• If the traffic information broadcast signal falls below a
certain level, the unit remains in the receiving mode for 1
minute. If the signal remains below a certain level for over 1
minute, the "T.INFO" indicator blinks.
• If you do not want to listen to the traffic information being
received, lightly press the T.INFO button to skip that traffic
information message. The T. INFO mode will remain in the
ON position to receive the next traffic information message.
• If the volume level is changed while receiving traffic
information, the changed volume level will be memorized.
When traffic information is received next time, the volume
level will be automatically adjusted to the level memorized.
PTY (Programme Type) Tuning
1
Press the F button so that the "FUNC" indicator lights up.
2 Press the PTY button to activate the PTY mode, while
the unit is in Radio (FM receiving) mode.
The Programme Type of the station being currently
received will be displayed for 5 seconds.
• If there is no receivable PTY broadcast, "NO PTY"
will be displayed for 5 seconds.
• If no RDS station can be received, the display
shows "NO PTY."
NOTE
If no button is pressed within 5 seconds after pressing the PTY
button, the PTY mode will be automatically cancelled.
3 Press the g DN and f UP buttons within 5
seconds after activating the PTY mode to choose the
desired programme type while the PTY (programme
type) is being displayed. Each press scrolls the
programme type by one.
LIGHT M ← CLASSICS → OTHER M
4 Press the PTY button within 5 seconds after selecting
the programme type to start searching for a station in
the selected programme type.
The chosen programme type indicator blinks during
searching and lights when a station is found.
If no PTY station is found, "NO PTY" will be displayed
for 2 seconds.
5 Press the F button to activate the normal mode.
The "FUNC" indicator light goes out.