Filter
Top Products
27-EN
Connecting to an External Amplifier
POWER-IC ON (Initial setting) / POWER-IC OFF
When an external amplifier is connected, sound quality can be
improved by stopping the power supply of the built-in amplifier.
POWER-IC OFF : Use this mode when the front and rear pre-
amplifier of the unit are used to drive an external amplifier
connected to the speakers. In this setting, the head unit’s
internal amplifier has no output to drive speakers.
POWER-IC ON : The speakers are driven by the built-in amplifier.
• No sound is produced by the system when the power output is set to
OFF.
Setting the Temperature Display for the
External Amplifier
TEMP °F (Initial setting) / °C
When a separately sold Amplifier Link compatible amplifier is
connected, you can set how to display its temperature. You can switch
the setting between Fahrenheit and Celsius.
°F : The temperature is displayed in Fahrenheit.
°C : The temperature is displayed in Celsius.
Setting the Tone Defeat for External Devices
INT AUDIO ON / INT AUDIO OFF (Initial setting)
When inputting external devices to this unit, turning tone defeat on
will bypass EQ and MX, i.e., sound for external devices is output at
the default setting.
Speakers
Front
left
Front
right
Rear
left
Rear
right
SPEAKER
RIGHT FRONT
SPEAKER
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
XM Radio (Optional)
Receiving XM Channels with the XM
Receiver (Optional)
XM Satellite Radio* is the next generation of audio entertainment,
with up to 100 brand-new digital channels. For a small monthly fee,
subscribers can hear crystal-clear music, sports, news and talk, coast-
to-coast via satellite. For more information, visit XM’s website at
www.xmradio.com or call 1-800-852-9696.
An optional XM Satellite Radio Receiver (TUA-T020XM) and an
optional XM antenna may be connected to the CDA-9835/CDA-9833.
With an XM Receiver connected to the Ai-NET input of the CDA-
9835/CDA-9833, the XM Receiver will be controllable from the
CDA-9835/CDA-9833.
* XM and its corresponding logos are trademarks of XM Satellite
Radio Inc.
• The controls on the CDA-9835/CDA-9833 for XM Receiver
operation are operative only when an XM Receiver is connected.
• The XM1, XM2 or XM3 band illuminates when in XM mode.
1
Press SOURCE/POWER to select XM mode.
2
Press BAND/TEL. to select XM1, XM2 or XM3.
Each press changes the band:
XM1 → XM2 → XM3 → XM1
3
Press 8 or 9 to select desired category.
Holding down 8 or 9 will change categories
continuously.
4
Press g or f to select the desired channel.
Holding down g or f will change channels
continuously.
• When using the optional remote control (RUE-4190), an XM
Channel can be directly called up with the numeric keypad of the
remote control.
1 While in XM Radio mode, enter the Channel number you
want to call up with the numeric keypad on the remote
control.
2Press ENTER or + 10/OK on the remote control within 5
seconds to receive the XM Channel.
If the channel number is 3 digits, the XM Channel is
automatically received after the channel number is input.
SOURCE/
POWER
Preset buttons
(1 through 6)
BAND/
TEL.
f g
MENU
TITLE
SEARCH
Rotary
encoder
8
9
Amplifier
Amplifier
Front
left
Front
right
Rear
left
Rear
right