Filter
Top Products
7-EN
• Before attaching the front panel,
make sure that there is no dirt or
dust on the connector terminals
and no foreign object between
the front panel and the main unit.
Initial System Start-Up
Make sure that the Power is turned off. When the power is
on, press and hold the POWER button for at least 3
seconds to turn off the power.
Immediately after installing or applying power to the unit, it
should be initialized. To do this, first, remove the detachable
front panel. Behind the front panel, to the right of the
connector, there is a small hole.
Using a ball-point pen or other pointed object, press the
reset switch mounted behind this hole to complete the
initialization procedure.
1
2
RESET switch
Attaching the Front Panel
1
First, insert the right side of the front panel into
the main unit. Align the groove on the front panel
with the projections on the main unit.
2
Push the left side of the front panel until it locks
firmly into the main unit.