Filter
Top Products
FRS-1002-MD / FRS-1002-MD-LG-PA
Guide to installation and operation
8
Installation and setup
The FRS-1002 card is installed in the openGear frame.
openGear frame
The FRS-1002 card requires a BNC rear output module. Depending on the
frame model you purchased, your frame may be equipped with a fixed 100
BNC rear panel.
openGear frame with a fixed 100 BNC rear panel
Your frame model may have a modular rear panel, to accommodate different
types of cards. You will then need to purchase and install a 10 BNC single rear
module for each FRS-1002 card in your openGear frame.
openGear frame with a modular rear panel
For information on the openGear frame and how to install your FRS-1002 card
and your rear modules, see the DFR-8310-C Multi Definition Digital Products
Frame and Power Supply (PS-8300) User Manual.