Filter
Top Products
FRS-1002-MD / FRS-1002-MD-LG-PA
Guide to installation and operation
19
Video Setup Window
The Video Setup window allows the configuration of video parameters
affecting the individual channels of the card.
Video Default Mode
The video Default mode function is used if no valid video is detected at
the input. Also, a reference mismatch may occur if there is a difference
between the input video format’s frame rate and the reference format’s
frame rate. The FRS-1002 can be set to respond to these problems with
the Video Default Mode function. Select from:
• Last good frame (output image freezes to the last good frame)
• Last good field (output image freezes to the last good field)
• Black (a black image is generated at the output)
Video Format
The Video Format function allows the user to manually override the
detected input video format and force another format at the output. Users
may select from:
• Auto (no override)
• 480i59.94
• 576i50
• 720p50
• 720p59.94
• 720p60
• 1080i50
• 1080i59.94
• 1080i60
Video Delay (frame)
The Video Delay (frame) function allows users to adjust the delay in
increments of one full frame. Up to 11 additional frames of delay can be
added in HD.