Filter
Top Products
FRS-1002-MD / FRS-1002-MD-LG-PA
Guide to installation and operation
15
Adjusting Parameters
The FRS-1002 card provides an extra level of control and security with an
administrator password-protected level, in which the parameters of the
card can be modified and controlled. The non password-protected level
or «read only» mode, where no password is entered, allows users to view
the various settings, but does not permit changes to be made.
The Administrator Level
To protect against unwanted modification of operating parameters, the
interface provides an administrator level (password-protected) mode
which allows users the right to modify card settings.
Admin Login
The Admin Login section can be found in the Card Setup window. Enter
the password «algolith» to gain full access to the administrator level.
Once the password is entered, the Card Setup window changes to
allow modification to the various settings. Allow a few seconds for the
password login to take effect.
The administrator mode remains active until you click the Logout
button.
Admin Logout
Use the Logout button to quit the administrator level. Once you have
logged out, the Card Setup window reverts back to the «read only»
mode and the preset settings cannot be modified.
Allow a few seconds for the logout to take effect.
Login to administrator level