Filter
Top Products
OPERATION
INSERTING TAPES
● You can select a reverse mode to play back one or both sides.
● Use only type I (normal) tapes.
Press the TAPE button and press
open the cassette holder.
Insert a tape with the exposed side down.
holder to close.
To select a reverse mode
the 4 mark to
Push the cassette
Each time the TAPE button is pressed, the reverse
changes.
I
To ~lav one side onlv, select =.
To play from front side to back side once only, select 1).
To play both sides repeatedly, select (=).
mode
PLAYING BACK A TAPE
Insert a tape, Then pressthe +b Ibutton to start play.
The tape counter indicates
the tape running length
Playback side of the tape
b : The front side is being played (forward).
“< : The back side is being played (reverse).
To stop play, press the
■ button.
To pause play, press the II button. ‘Toresume play, press again.
To change the playback side, press the <E button in play
mode.
To fast forward or rewind, press the ++ c,r P> button in stop
mode. Then press the
■ button to stop the tape.
To start’play when the power is
off (Direct Play
Function)
Press the TAIJE button. The power is turned on and play of the
inserted tape begins,
To set the tape counter to 0000
Press the W button in stop mode.
The counter is also set to 0000 when the cassette holder is
opened.
About cassette tapes
● To prevent accidental erasure, break off the plastic tabs
on the cassette tape after recording with a screwdriver c)r
other pointed tool.
G[
\
‘o ‘;c@
Side A
\~a7 @
Tab of side A
lb’
To record on the tape again, cover the tab openings with
adhesive tape, etc.
G
\
<c@
*
1
/
● 120-minute or longer tapes are extremely thin and easily
deformed or damaged. They are not recommended.
● Take up any slack in the tape with a pencil or similar tool
before use. Slack tape may break or jam in the mechanism.
@$
\ La–
‘J )
1
11 HIGHS(+