Aiwa LCX-350 Stereo System User Manual


 
REPEAT PLAY
One or all the tracks can be played repeatedly.
To repeat the entire
disc, turn on “REPEAT ALL’.
To repeat the desired track,
turn on “REPEAT 1”.
Press the REPEAT buton.
Each time it is pressed, the operations can be selected cyclically.
@; REpEAT ALL
‘~ REPEAT 1
@ Cancel
t
I
I
REPEAT ALL
REPEAT 1
I
When using the remote control
Press the REPEAT button while pressing the SHIFT button.
To cancel it, press the buttons again.
m
During “REPEATALL” play, RANDOM play can be performed.
During “REPEAT 1” mode, entering RANDOM mode will cancel
the “REPEAT 1” mode.
To repeat only selected tracks, select the “REPEAT ALL”
function and program the desired tracks (see below). You can
program the desired tracks first before selecting the “REPEAT
ALL’ function.
PROGRAMMED PLAY
Up to 30 tracks can be programmed from the inserted disc
Use the remote control.
1 Press the PRGM button while pressing the SHIFT
button in stop mode.
“M” flashes on the display.
m
2
3
4
Press the numbered buttons and the +1 Obutton
to program a track,,
Example:
To select the 12th track, press the +10 and 2 buttons.
To select the 20th track, press the +10, +10 and Obuttons.
Program number
I
Selected track <~ Total playing time of
number
the selected tracks
Total number of
selected tracks
Repeat step 2 to program other tracks.
Press the * button to start play.
To check the program
Each time the b- button is pressed in stop mode, a track
number and program number will be displayed.
To clear the program
Press the button in stop mode.
To add tracks to the program
Before playing, repeat step 2. The track will be programmed
after the last track.
To
change the programlmecl tracks
Clear the program and repeat all the steps again.
m
During programmed play, the following operations cannot be
performed:
–Random play.
–One-track repeat (REPEAT 1).
–Direct selection of the tracks with the numeric buttons.
[f programmed time is more than 99:59 minutes, or the disc
track number 31 and above is programmed, total playing time
show --:-- in the display.
ENGLISH I ~