Filter
Top Products
16
English
SETTING THE CLOCK
1Connect the AC power cord to a wall outlet.
The clock display begins flashing. If the clock is not displayed
correctly, disconnect the AC cord and remove the backup
battery if inserted. Then, connect the AC cord and insert the
backup battery again.
2 Press SET.
Day of the week starts flashing.
3While day of the week flashes, press UP or DOWN to set
day of the week, then press SET.
mon: Monday, TUE: Tuesday, WEd: Wednesday, THU: Thursday,
Fri: Friday, SAT: Saturday, SUn: Sunday
The hour starts flashing.
4While the hour is flashing, press UP or DOWN to set the
hour, then press SET.
To change the hour faster, keep UP or DOWN pressed.
The minutes start flashing.
5While the minutes are flashing, press UP or DOWN to set
the minutes, then press SET.
The clock starts from 00 seconds.
To change the clock setting
Press SET while the power is turned off. Day of the week starts
flashing. Repeat the procedure from step 3.
To adjust the time for daylight-saving time
Keep BAND/FM STEREO pressed for 2 seconds while the power
is turned off. appears in the display and the time advances by
1 hour.
When daylight-saving time ends, keep BAND/FM STEREO
pressed for 2 seconds while the power is turned off until the
disappears from the display.
5
3
4