Aiwa CX-NA31 Stereo System User Manual


 
PROGRAMMED EDIT RECORDING
6
Programmed edit function enables CD recording while checking
the remaining time on each side of the tape as the tracks are
programmed.
The programmed edit recording will not start from a point halfway
in the tape, The tape must be recorded from the beginning of
either side.
1
2
3
4
5
Insert the tape into deck 2.
Insert the tape with the side to be recorded on first facing out
frclm the unit,
Press the CD button and load the disc(s).
Press the EDIT/CHECK button twice while
pressing the SHIFT button on the remote control.
“ED1l-” and “PRGM” light up on the display.
Plress the numbered buttons on the remote
control to designate the tape length.
1Clto 99 minutes can be specified.
Maximum recording
Tape length
time for side A
I I
Tape side A (front side)
Press the one of the DISC DIRECT PLAY buttons
tc~select a disc.
Tlhen, press the numbered buttons and the + 10
button on the remote control to program a track.
Example: To select the 10th track of disc 2, press the DISC
DIRECT PLAY 2 button, then press the + 10 and Obuttons.
7
8
9
Repeat step 5 for the rest of the tracks for side A.
A track whose playing time is longer than the remaining time
cannot be programmed.
Remaining time
of side A
Total number
Programmed
of programmed
tracks
tracks
Press the EDIT/CHECK button while pressing the
SHIFT button on the remote control to select side
B and program the tracks for side B.
After confirming B on the display, repeat step 5,
Tape side B (reverse side)
Press the EDIT/CHECK button while pressing the
SHIFT button to select side A and press the O
REC/REC MUTE button to start recording.
CD play and recording of edited tracks for the first side start
simultaneously. When the last track programmed for side A
is finished, deck 2 enters the recording stop mode. After
entering the recording stop mode, go to step 9.
Press the EDIT/CHECK while pressing the SHIFT
button on the remote control for recording of
the second side.
“B” is displayed.
10 Turn over the tape in deck 2 and press the .
REC/REC MUTE button to start recording.
Recording starts.
To stop recording
Pressthe
button, Recordingand CD play stopsimultaneously.
To check the order of the programmed track numbers
Before recording, press the EDIT/CHECK button while pressing
the SHIFT button on the remote control to select side A or B, and
press the 44 or ›~ button repeatedly.
Program number
Track number
Programmed
track numbers
To change the program of each side
Press the EDIT/CHECK button while pressing the SHIFT button
on the remote control to select side A or B, and press the
CLEAR button to clear the program of the selected side. Then
program tracks again.
To clear the edit program
Press the
button twice so
display.
that “EDIT disappears on the
ENGLISH
16