Filter
Top Products
Inserting batteries
Detach the battery cover on the rear of the remote control and
insert two size AA (R6) batteries.
POWER
Remote
sensor
Function
buttons
DEMO
AA”(R6)
When to replace the batteries
The maximum operational distance between the remote control
and the sensor on the main unit should be approximately 5 meters
(16 feet). When this distance decreases, replace the batteries
with new ones.
PHONES
To turn the unit on
Press one of the function buttons (TAPE, TUNER, AWUVIDEO,
CD). Playback of the inserted disc or tape begins, or the
previously tuned station is received (Direct Play Function).
POWER is also available.
Using the remote control
The instructions in this manual refer mainly to the buttons on the
main unit. Buttons on the remote control with the same names
as those on the main unit can be used as well.
To turn the power off
Press POWER.
To use SHIFT on the remote control
Buttons @ have two different functions. One of these functions
is indicated on the button, and the other on the plate above the
button.
To use the function on the button, simply press the button.
To use the function on the date above the button, press the button
while pressing SHIFT.
DEMO (Demonstration) mode
When the AC cord is connected, the display window
demonstrates the functions ofthe unit. When the power is turned
on, the DEMO display is overridden by the operation display.
When the power is turned off, the DEMO mode is restored.
To cancel DEMO mode
Press DEMO. The clock display appears. (To set the current
time, see “SETTING THE CLOCK on page 16.) To re-activate
the DEMO mode, press DEMO again.
To use FUNCTION on the remote control
The FUNCTION substitutes for the function buttons (TAPE,
TUNER, AU)UVIDEO, CD) on the main unit.
Each time FUNCTION is pressed while power is on, the next
function is selected cyclically.
Using the headphones
Connect
the headphones to PHONES jack with a stereo mini
plug (a3.5 mm,
‘/8 inch).
No sound is output from the speakers while the headphones are
plugged in.
P PRESET on the remote control
The function is the same as that of+
➤ on the main unit.
SHIFT
FUNCTION
@
P PRESET
m
● If the remote control is not going to be used for an extended
period of time, remove the batteries to prevent possible
electrolyte leakage.
● The remote control may not operate correctly when:
- The line of sight between the remote control and the remote
sensor beside TAPE is exposed to intense light, such as direct
sunlight
- Other remote controls are used nearby (those of a television,
etc.)
5 ENGLISH